概 述 

        SCB1250 系列非晶合金树脂绝缘干式配电变压器是我公司为创建节能型社会而推出的新一代节能产品。该 产品采用新一代铁心材料一非晶合金，非晶合金最为的显著特点是单位损耗低，在相同的磁密下，非晶合金铁 心的单位耗损仅为硅钢片的25%，节能效果非常显著。非晶合金树脂绝缘干式配电变压器继承环氧树脂浇注干 式变压器的全部优点，是城市电网改造重点推荐的产品。

产品特点：

1、空载损耗低，节电效果好，是目前运行成本最经济的配电变压器。

2、使用场所灵活，可与预装式变电站配套或安装在配电变压器。 

3、阻燃、防爆、无污染、免维护，可无人值守。 

4、动、热稳定度高，抗短路、耐雷电冲击。

5、线圈全密封结构不吸潮、不吸尘、局部放电量低于10PC,运行安全可靠。 

6、按用户的需要配有温度显示、温度控制系统，可与轴流风机配合使用。

summary

        SCB1250 series amorphous alloy resin insulated dry-type distribution transformer is a new generation of energy-saving products launched by our company to create an energy-saving society. This product uses a new generation of core material - amorphous alloy. The most notable feature of amorphous alloy is low unit loss. Under the same magnetic density, the unit loss of amorphous alloy core is only 25% of that of silicon steel sheet, and the energy-saving effect is very significant. Amorphous alloy resin insulated dry-type distribution transformer inherits all the advantages of epoxy resin cast dry-type transformer and is the key recommended product for urban power grid reconstruction.

Product features:

1. With low no-load loss and good power saving effect, it is the distribution transformer with the most economical operation cost at present.

2. The use site is flexible, and can be matched with the prefabricated substation or installed in the distribution transformer.

3. Flame retardant, explosion-proof, pollution-free, maintenance-free, and unattended.

4. High dynamic and thermal stability, resistance to short circuit and lightning shock.

5. The fully sealed structure of the coil does not absorb moisture and dust, and the local discharge capacity is less than 10PC, so the operation is safe and reliable.

6. It is equipped with temperature display and temperature control system according to user's needs, which can be used with axial flow fan.